Media Library / Images

SG 1" 1x0 Al

Sight Glass with propeller, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

Slimline quality dispensing hose for the forecourt

Unloading petroleum products at the service station (road tanker to UST)

Connection offset UST filling point: LG 3" hose assembly for gravity discharge, LTW 50 hose assembly for vapour balance

Vehicle refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 ACME nozzle

ZVA Slimline 2, black, guard 3 - detail view with new hold-open latch

Camlock hose couplings: system comparison

Easyloc from Elaflex with automatically secured levers.

Safety Swivel Break SSB 16 SS of stainless steel f. ZVA AdBlue HV

old design

DDC-M 80 SS; SG 3", VC 75-3, Elaflon FEP 75

Epoxy resin loading with Dry Disconnect Coupling, sight glass and FEP universal hose

MK-A 80 SS, TW female coupler with Active Safeguard Lever, VB 80 SS

VB 50 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Elaflex Pacific (Australia)

Construction

Elaflex Hamburg

Assembling dispensing hose fitting

Aljac Closed Circuit Sampler (CCS), Carter Underwing Nozzle, bonding reel

Airfield refueller

Camlock Cam Locking hose tails AMK-St 50 Ms and AVK-St 50 Ms (brass)

Elaflex Hamburg, stock

Oasis NGV / CNG Refuelling Equipment

Refuelling with ZVA Slimline 2

Portugal

Fuel Grade Identification to EN 16942 for ZVA Nozzles

Type EK FGI - attach with Product Badge EK 145

Slimline 21 red

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

Elaflex seals

Universal hose assembly for vehicles fighting dangerous goods incidents:

Aspiration hose PTFE 32 length 2,1 mtr., one side VKC 32.50 SS/Vi SS, other side open

TS 80 lockable cap vor VK 80 couplings

M 21-1" cr

Female ferrule hose coupling EN 14424, reuasable. Slimline 21 hose, yellow.

Elaflon Plus FEP hose assemblies:

Bulk filling of powders

Oasis CNG refuelling equipment:

Ultra Fast Fill System (Diagram, English)

Coloured hose assemblies for the forecourt

Slimline 21, M 21-1" NR

ZVF 50 JET

Manual aviation fuelling nozzle for overwing service. Flowrate up to 400 ltr. / min. (85 IGM – higher flowrates are possible). Size DN 50. Working pressure PN 10 (140 psi). Temperature range - 40° C up to + 55° C.

ZVG 2 ACME nozzle for L.P. Gas / Autogas

LPG nozzle for vehicle refuelling with liquefied petroleum gas (propane, butane and mixtures) up to 50 l / min. Working pressure 25 bar. Test pressure 40 bar. Burst pressure > 100 bar. Temperature range - 25° up to + 70° C, 'LT'-Type down to - 40° C.

EL 800 Earthing Strap with vulcanized copper strand

Electrically conductive bonding. Use for road tankers for petroleum based products, solvents, bulk tankers, forklifts, cable cars and cable Electro-Buses.

Boat refuelling Australia

ZVA Slimline 2, Slimline hose assembly