Images

Vehicle refuelling with LPG (L.P. Gas, Autogas)

GasGuard GG1 nozzle, Butapal hose

Elaflex Hamburg, stock bellows

LPG road tanker loading with MannTek SBC Safety Breakaway Couplings

Compact Line HD 50, Hose Reel Spring Rewind

FEP 5O, MannTek DDC-M 5O SS

Cargo loading of a tanker with petroleum based products; FHD hose assembly with new longitudinal stripe to avoid torsion

Picture courtesy of Macoil International, Gibraltar

Offset UST filling point, LTW hose assemblies with TW couplings

Slimline 21 blue

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

Grafik ARK 19

Safety Break for LPG (Autogas) dispensers. Hose Break. Reassembly after separation without tools.

TW filll adapters:

TWV 7 (VK 50 x MB 80), TWÜ 13 (VK 50 x 21/2" fem.)

PAL hose assemblies:

PCD 32 / RMC-SS, Butapal 32 / ACMX, Polypal Plus 50 / SFC 50 SS, Tecnopal 38 / MKX-SS, Pyropal 38 / MC38

Elaflon Plus FEP hose assembly, crimped foodstuff fitting

Hose Reel f. marina terminal, Manual Rewind

TW hose assembly

ZVF 50 JET

with HD-C NEON hose assembly

ERV TA:

ERV with white PTFE lining. Used when the chemical resistance of the chosen ERV type is insufficient. Resistant to all commonly used liquids. Electrically isolating, therefore not suitable for flammable liquids in Ex-Zones. Admissible working temperature of expansion joint has to be observed. For maximum pressure of 6 bar – not suitable for vacuum.

LNG ship bunkering

DCC 100 Dry Cryogenic Coupling, CBC 100 PERC Cryogenic Breakaway Coupling

PHD-F aircraft refuelling hose

PHD 63 F

VX 75-3" Ms

Male hose coupling 3" BSP of brass with Spannfix clamp

Stainless steel couplings with PFA coating, type "...SSE"

Surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.